<source id="vnv77"><sub id="vnv77"><dl id="vnv77"></dl></sub></source>
<source id="vnv77"></source>
  • <u id="vnv77"><sub id="vnv77"><object id="vnv77"></object></sub></u>

    <blockquote id="vnv77"><p id="vnv77"></p></blockquote>
  • <var id="vnv77"></var>
    會員登錄
    請登錄您的生意號,獲取電子名片。便于轉發分享!
    取消
    Tianda News
    會員登錄
    請登錄您的生意號,獲取電子名片。便于轉發分享!
    取消
    Coal burning boiler ZDFR
    Coal burning boiler ZDFR
    Product Category:Hot blast stove series
    Fluidized bed coal-fired hot blast furnace (abbreviated as boiling furnace), its combustion mode is that the coal is broken into particles less than 10mm, through the coal feeder uniform speed into the furnace fluidized bed; The high pressure wind of the blower is shot into the belly of the furnace through the isobaric bellows from the numerous holes of the hood on the air distribution plate, and the scattered wind is aggregated into the "air cushion" to hold up the coal particles and the charge is fluidized boiling combustion. The coal particles and slag jump at high temperature, friction, collision and cracking, from large to small until burned out; This kind of combustion has the characteristics of large contact area between air and fuel, high relative motion speed, long residence time of fuel in the fluidized bed, fast combustion speed, high degree of burnout, energy saving and environmental protection. Therefore, it has been widely used and developed rapidly in industrial kiln.
    Product Introduction

    1.Product introduction

    Fluidized bed coal-fired hot blast furnace (abbreviated as boiling furnace), its combustion mode is that the coal is broken into particles less than 10mm, through the coal feeder uniform speed into the furnace fluidized bed; The high pressure wind of the blower is shot into the belly of the furnace through the isobaric bellows from the numerous holes of the hood on the air distribution plate, and the scattered wind is aggregated into the "air cushion" to hold up the coal particles and the charge is fluidized boiling combustion. The coal particles and slag jump at high temperature, friction, collision and cracking, from large to small until burned out; This kind of combustion has the characteristics of large contact area between air and fuel, high relative motion speed, long residence time of fuel in the fluidized bed, fast combustion speed, high degree of burnout, energy saving and environmental protection. Therefore, it has been widely used and developed rapidly in industrial kiln.

    2.Fluidized bed uses

    Boiling furnace can be used for rotary dryer, vertical dryer, hammer dryer, indirect dryer, slag micro powder vertical mill, air sweep coal mill or coal powder vertical mill, fertilizer slurry granulator, powder drying tower, waste heat generation heat, material frying pan machine, all kinds of semi-finished product dryer and other equipment heating; Can be widely used in industrial raw materials or products drying, roasting. Such as: slag, clay, sludge, calcium carbide slag, compound fertilizer, industrial gypsum, gypsum board, iron fine powder, quartz sand, yellow sand, laterite ore, sulfur concentrate, siderite, zinc leaching slag, white carbon black, coke, coal powder and slime, etc.

    3.Main performance and characteristics

    1.Wide fuel adaptability, combustible value of more than 6270kJ/kg (1500kcal/kg) of all kinds of bituminous coal, anthracite, and even coal liver stone, chain row furnace slag, oil shale, coal slime, biomass fuel;
    2.Furnace combustion temperature (850~1100t), uniform operating temperature, stable heating;
    3.High combustion efficiency, burnout rate can reach more than 99%, furnace thermal efficiency is greater than 94%;
    4.Easy ignition, long compression time, intermittent compression fire up to 16~48 hours, no need to reignite the furnace;
    5.The outlet temperature of hot flue gas can be adjusted, the heating load can be adjusted broadly, and the outlet orientation of heating flue gas pipeline is flexible.
    6.Ash slag carbon content < 1%, not easy to soften or bond, good activity, suitable for use as cement mixing material, easy to comprehensive utilization;
    7.Clean combustion, low nitrogen oxide content in the flue gas, low cost curing desulfurization can be used in the furnace, so that the sulfur in the coal to solidify into the slag;
    8.Realize mechanical and electrical integration control, intelligent design of thermal control, low labor intensity;
    9.Long service life of furnace lining, less wearing parts, low maintenance cost.

    Product parameter introduction

    Technical parameters/models

    Heating capacity kJ/h

    Coal consumptionkg/h

    Furnace body dimension length × width × heightmm

    Furnace body weight t (reference)

    ZDFR-1

    1 x4.18x106

    143

    4272x3228x4400

    90

    ZDFR-2

    2x4.18x 106

    286

    4504x3460x4800

    110

    ZDFR-3

    3x4.18x 106

    429

    4968x3924x5000

    130

    ZDFR-4

    4x4.18x 106

    571

    5316x4156x5400

    150

    ZDFR-5

    5x4.18x106

    714

    5784x4852x5600

    180

    ZDFR-6

    6x4.18x10°

    857

    6016x4968x5800

    200

    ZDFR-8

    8x4.18x 106

    1143

    6132x5780x6300

    240

    ZDFR-10

    10x4.18x 106

    1429

    6480x6244x6800

    270

    ZDFR-12

    12x4.18x106

    1714

    7060x6940x7100

    300

    ZDFR-14

    14x4.18x 106

    2000

    7408x7404x7400

    350

    ZDFR-16

    16x4.18x 106

    2286

    7520x7404x7800

    400

    ZDFR-18

    18x4.18x106

    2571

    7980x6940x8600

    420

    ZDFR-20

    20x4.18x10。

    2857

    8100x7170x8940

    450

    ZDFR-25

    25x4.18x 106

    3571

    8330x7400x9360

    500

    ZDFR-30

    30x4.18x 106

    4286

    8930x7656x10020

    600

    ZDFR-35

    35x4.18x10'

    5000

    9140x7780x10500

    750

    Instructions for ordering


    Installation precautions


    Home

    Home

    News

    News

    About

    About

    Products

    Products

    Contact

    Contact

    色色无码人妻系列_国产中文一区二区_91高清国产精品_1级片无码高清久久久
    <source id="vnv77"><sub id="vnv77"><dl id="vnv77"></dl></sub></source>
    <source id="vnv77"></source>
  • <u id="vnv77"><sub id="vnv77"><object id="vnv77"></object></sub></u>

    <blockquote id="vnv77"><p id="vnv77"></p></blockquote>
  • <var id="vnv77"></var>